Putting a line on a reel and spooling a baitcaster fishing reel correctly is critical for avoiding problems. Line trouble could happen to any fisherman at that time if you didn’t do it correctly. Don’t worry; learning to spool a reel is a simple process that will have you up and running in no time.
Arrange all equipment that will be needed for Baitcasting
Before putting the line on the reel, you need to gather all-sufficient equipment to show you the better result.
It is essential to check rod action and power, which can result in long-distance casting situations. We recommend selecting a 6-10 foot long rod capable of casting 1 to 8 ounces or more of weight, including the lure. There are some products that we have listed. Check them on amazon.
- Shakespeare UglyStik GX2 Baitcasting Rod
- KastKing Perigee II Fishing Baitcasting Rod
- Berkley Cherrywood HD Baitcasting Rod
- Piscifun Torrent Baitcasting Rod
- Abu Garcia Vengeance Baitcasting Rod
One of the first things you’ll want to do is find the right gear because the ratio gear ratio range will handle most bass fishing functionalities. The most common reel on the market has a 6.4:1 gear ratio, allowing you to work both fast and slow-moving presentations.
Don’t forget to check the spool size of the reel; there should be a 1/8 inch gap between the line and the top of the spool.
- Shimano Curado DC
- Lew’s Hyper Mag SLP
- Shimano Chronarch MGL 150
- Abu Garcia Revo SX
Choose a line weighing 10 pounds or more and in larger diameters that come off the spool more accessible and will be less likely to overrun. Braid proved to be the superior material, but Mono holds knots better and is less expensive than braid.
- Monofilament Baitcaster Fishing Line
- Monofilament Roll Track Baitcaster Fishing Line
- PowerPro Spectra Fiber Braided Baitcaster Fishing Line (Optional)
- KastKing SuperPower Braided Baitcaster Fishing Line (Optional)
4. Cutting nail
Nail clippers are preferable because they are small, sharp, and easy to use with one hand.
How to put fishing line on a reel
After arranging the equipment now, we will tell you the step, and the process follows the process the way we say.
1. Enter line through the first guide of the rod
To help control the relatively thick fly line movement, there are a number of smaller looped guides spaced along the rod. First, serially enter the line through all of the looped guides.
2. Enter line through the line guide of the reel
There is a line guide built into the reel that moves from side to side as you spool, and this line guide has one small hole in it. After passing the line through the rod-lopped guide, pass it through the reel guide.
3. Two superficial overhand knots are sufficient to Tie the line around the spool and knot it.
To tie the line to the spool, but for larger fish, several knots can be considered.
4. Start spoiling until it’s almost full
Once you’ve tied a secure knot around the spool, you can begin reeling line onto it. In that time, it will be good to hold the line spool between a pencil or pen at the end of your rod so that the line can come out smoothly.
5. Do not fill the spool
Overfilling your spool can make casting difficult. On the other hand line, birds nest can cause by overfilling, which is another common issue. So, try to stop spooling before the spool’s top is filled.
Some Important FAQ
Here we listed some questions with their suitable answer and answers that are very important to understand the discussion above. Go through it; we hope it might be of great help.
What’s the best line to use on a baitcaster?
Baitcast reels were not designed for light line, so use 10 pounds or more extensive line, which comes off the spool more accessible and is less likely to overrun.
How many lines should be on a baitcaster?
You don’t want to fill it; the general rule is to put enough line on your reel to leave a 1/8 inch gap between the line and the top of the spool.
Should I use braid or mono on my baitcaster?
Mono holds knots better and is less expensive than braid. Because light braid can dig into itself, it works best on smaller bait-casting reels.
Can I put a heavier line on a reel?
Heavier monofilament and fluorocarbon lines do not work well on spinning reels because their diameter is large enough that the spooled line jumps off the reel spool when casting.
The less time it takes to put the line to the reel, the more discussed. We are discussing the process and suggest to you what kind of equipment can give you good results. Try to collect the correct item that is needed and do the process that we say.