Best Trout Spinning Reels 2020 – Buyer’s Guide

The world of trout isn’t an easy one to get to the bottom of. This is because there are various type that can be found in different places, times, and fished for in different techniques and with different lures.

A big part of buying a good spinning reel for catching trout is actually knowing which type you’re going to aim for.

And since you could be looking to fish for a number of types, I’ve made a list of the best spinning reels for trout on the market that would suit different kinds.

Read more: Best Spinning Reels for Bass – Buyer’s Guide.

The 7 Best Trout Spinning Reels for 2020

Here our selection of best spinning reels for Trout with review of each model.

1. Shimano Stradic CI4+ – Best Quality Reel for Trouts

Shimano Stradic CI4+ 2500 FB

It’s quite evident that Shimano has put a lot of thought into the design of the Stradic CI4+ 2500 FB.

It comes with a Magnumlite (MGL) rotor and a G-Free body design that moves the center of gravity closer to the hand’s position to prevent wrist fatigue.

Moreover, the advanced CoreProtect 360-degree water resistance extends its durability and helps it withstand all types of environments.

On top of that, the cold-forged aluminum spool and strong Hagane drive gears help keep it both smooth and solid even under bigger loads.


The carbon fiber body of the reel makes it weigh only 6.7 ounces but it can still reel in 20-pound trout.

It also does so at an impressive speed as its gear ratio is 6.0:1 and it retrieves an incredible 35 inches of line per crank.


The Stradic CI4+ 2500 FB has X-ship components that extend the accuracy and smoothness of the gear system –especially against bigger fish.

There are also 6 S A-RB shielded stainless steel ball bearings that stop any dirt, water, or salt from entering the reel.

I had to give it very little maintenance after my saltwater fishing trips.


  • Amazing line management
  • Almost completely water-resistant
  • Smooth and super-fast operation
  • Lightweight and portable


  • Quite pricey
  • Small anti-reverse switch

The Stradic Ci4+ 2500 FB is a little pricey but I did get excellent value for the money.

It’s very durable, smooth, and performs amazingly with high speed.

Check Price at Amazon

2. Abu Garcia Revo SX – Best Ultralight Spinning Reel for Trouts

Abu Garcia Revo REVO2XS10

Design and Body

An alloy frame to resist corrosion and carbon handle side plates, housing, and body materials are the fundamental elements that make the Abu Garcia Revo REVO2XS10 a durable reel.

The fact that its 9 HPCR bearings are made from stainless steel and the integration of a Carbon-Matrix technology into the hybrid drag system also contribute to the fact.


The IM-C6 body design and graphite rotor keep the Abu Garcia Revo REVO2XS10 lightweight at only 7.2 ounces.

I loved the superior 6.2:1 gear ratio that made the reel perform with amazing speed. Moreover, the 30-inch line retrieves also played a great role in the speed of performance of the REVO2XS10.


To keep up the fluidity of the reel, Abu Garcia used a Rocket line management system as well as a Rocket spool lip design.

Moreover, the Flat EVA knob provides a pretty solid and comfortable grip on the reel while the K-Clutch anti-reverse ensures secure hook sets.

The hybrid drag system consists of carbon washers that maintain consistent drag pressure while the brake system uses magnets to absolutely eliminate backlash.


  • Smooth 9 ball-bearing system
  • Magnetic brake system
  • Portability
  • Interchangeable hand retrieve


  • A little pricey

Bottom line:

The Abu Garcia Revo REVO2XS10 is one of the best trout fishing reels you can get as it performs very fast, has the highest gear ratio, and combines several great features.

Check Price for Abu Garcia Revo SX at Amazon

3. KastKing Sharky III

KastKing Sharky III 3000

Design and Body

I can’t lie that I was expecting a low-performing reel when I saw the KastKing Sharky III 3000’s price. But it beat my expectations in every way.

The reel’s body is made from reinforced graphite and it’s equipped with high-performance brass pinion gears.

Moreover, the CNC aluminum Shark Fin braid-ready spool’s graphite body makes it corrosion-resistant and it has a computer balanced rotor.


With both front and rear drag functions and triple-disc carbon fiber drag washers, the KastKing Sharky III 3000 is advertised to be able to handle fish of up to 33 pounds.

However, that number can be a little exaggerated. Because even if it has a 5.2:1 gear ratio and a 29.4 line retrieve rate, it’s still quite a heavy reel at 9.4 ounces.

Its performance was one of the smoothest, I have to give it that. With 11 bearings working to keep the operation flowing, how could it not be smooth?


The KastKing Sharky III 3000 has an intrusion shield system that makes the reel more durable and an anti-reverse switch that keeps your hook sets secure.

Finally, the sure-grip T-handle guarantees a stable reel performance and you can switch the retrieve to be on either side of the reel.


  • Smooth drag
  • Sleek design
  • Highly affordable
  • Great bang for the buck


  • Quite heavy yet only suitable for smaller trout

Bottom line:

My only problem with the KastKing Sharky III 3000 is that it doesn’t work well for bigger-sized fish for a reel of its weight.

Other than that, it’s a light to medium-sized trout spinning reel that doesn’t break the budget and has great drag power and smoothness.

Check Price at Amazon

4. Piscifun 4000

Piscifun 4000

Design and Body

The braid-ready CNC machined aluminum spool spares you the need for a slip to tie the braid directly to the spool.

And with a graphite body and rotor, the Piscifun 4000 definitely passes the durability test.

Not the test for lightweight, however, as this reel weighs 11.4 ounces.

Precision brass gears, reinforced body, and a stainless steel main shaft all combine to give your reel reliability, smoothness, and silent performance.


The 3 carbon fiber drag system enables the Piscifun 4000 to reel in fish of up to 25 pounds in weight.

It can do so quite quickly with a 5.2:1 gear ratio, a 33.5-inch retrieval rate, and 11 anti-corrosion steel bearings made from reinforced alloy.


To stop moisture and resist corrosion, the Piscifun 4000’s drag features a Sealed Rubber Ring.


  • Cheap
  • Fast, smooth, and quiet performance
  • Great build for a budget reel


  • Quite heavy

Bottom line

If you’re thrifty shopper, you’ll definitely enjoy the Piscifun 4000 as it’s cheap and yet has satisfactory retrieve, drag, and smoothness of operation.

Check Price for Piscifun 4000 at Amazon

5. Okuma Ceymar C-10

Okuma Ceymar Spinning Reel C-10

Design and Body

The Okuma Ceymar C-10 comes with a cyclonic flow rotor that brings in more airflow through the ported rotor.

It also reduces the intrusion of water and consequently extends the durability of the real a little. That is beside the fact that the reel’s body is made from graphite.



The quick anti-reverse bearing helps keep your hook sets solid.

I loved how lightweight the Okuma Ceymar C-10 is, however, I found its drag power absolutely too small.

Its 5.0:1 gear ratio and 21-inch line retrieve ratio can help you enjoy quick fishing action.

Additionally, the Okuma Ceymar C-10 has 8 bearings in total to make its operation smooth and reliable.


The gear alignment system work on maximizing the casting ability of the reel.

Furthermore, the precision elliptical gearing system reduces friction to increase the distance and accuracy while extending the line’s longevity.

On top of that, it also smoothens the performance of the Okuma Ceymar C-10 Spinning Reel and evens out the drag pressures.

Finally, the zinc die-cast handle was designed to withstand any stress and endure heavy battles while giving you the torque you need to catch your fish.


  • Performs superbly for a reel under 50 bucks
  • Cheap


  • Not the most durable

Bottom line:

I was impressed with the performance of the Okuma Ceymar C-10’s good performance seeing that it comes at less than 50 bucks.

I can’t say it’s the best trout reel out there, but it’ll definitely give you a bang for your buck.

Check Price at Amazon

6. Pflueger President PRESSP30X – Best Value Spinning Reel for Trouts

Pflueger President PRESSP30X

Design and Body

The graphite body and reel used for the Pflueger President PRESSP30X’s construction aim to make it as light as possible. Combine that with an aircraft-grade aluminum handle and the durability of the reel is guaranteed.

Moreover, its ported solid aluminum spool comes braid-ready and spares you the need to back it up with monoline.


With 9 ball bearings and 1 roller bearing, the PRESSP30X performs quite smoothly.

These bearings are made from stainless steel to enable them to resist corrosion and increase the durability of the reel.

Although this reel weighs 8.3 ounces, it can only reel in fish of about 9 pounds, which isn’t quite satisfactory.

However, it fast 25.3 line retrieve rate and 5.2:1 gear ratio may help you finish fights quick enough to be in your favor.



The Pflueger President PRESSP30X comes with a SureClick heavy-duty aluminum bail that makes it both durable and stable.

Moreover, the reel is corrosion-resistant and provides you with consistent drag pressure thanks to the stainless steel oil-felt drag.

And to top it all, the soft-touch knob is ergonomically designed to help keep a good grip on it.


  • Good value for the money
  • 10 ball-bearing system
  • Interchangeable hand retrieve


  • A little bit of a cheapish feel and look
  • Inconsistent drag

Bottom line

The Pflueger President PRESSP30X is one of the more affordable choices on the list. However, it’s not the lightest or quickest.

While it isn’t capable of dragging in big fish, its smoothness can help you during a fight with one.

Check Price for Pflueger PRESSP30X at Amazon

7. Shimano Sedona 1000 FI – An Excellent Trouts Fishing Reel

Shimano Sedona 1000 FI

Design and Body

The Shimano Sedona 1000 FI will give you great performance for its price with the upgraded, gold-forged Hagane gears and flagship Hagane gearing.

Its G-Free body technology also works on reducing the strain on your hand to prevent fatigue so that you can hold up your fights as long as possible.


With a 5.0:1 gear ratio and 26-inch line retrieve rate, it’s adequately fast. And weighing only 7.6 ounces, it’s lightweight too.

However, its drag power is disappointing at only 7 pounds.

A good thing about the Sedona 1000 FI is its increased line capacity thanks to the double-anodized, machine-cut spools.

This is without even compromising the compact design of the reel.


The propulsion line management system works on maximizing the cast distance while the spool lip design works on preventing backlashes and wind-knot formations.

Finally, the oval oscillation gear keeps the spool speed uniform and keeps the lay even instead of getting hoarded at the ends of the spool.


  • Smooth casting
  • Reliable and durable
  • Effective drag system


  • Small drag capacity
  • Too few bearings

Bottom line

The Shimano Sedona 1000 FI isn’t a “catch” of the day but it’s moderately-priced for the features it has to offer.

Check Price at Amazon

Why Use a Spinning Reel to Catch Trout

A spinning reel can be used by both experienced and inexperienced anglers. It can also handle wide ranges of lure weights.

Moreover, when you pair it appropriately with a lightweight rod, you’ll get a seamless fishing experience.


How to Choose a Good Spinning Reel for Trout?

Being vigorous and active fish, trout will definitely have you running around the place trying to catch them.

That’s why your fights should be quick and your reel should be durable.

There are a couple of things you should look for when you’re shopping for a trout spinning reel:

Gear Ratio and Line Retrieve

Higher gear ratios and line retrieves mean faster line recovery –something I think is vital for catching trout.

For example, if your reel’s gear ratio is 6.0:1, this means that the spool revolves 6 times with each turn of the handle.

Reel Size

Generally, the larger the fish you’re seeking to catch, the bigger your reel should be.

A 1000 or 2500 reel would do a fine job catching trout. While you can also find 3500 reels that are only slightly heavier but can store more line.

Moreover, the heavier the reel is, the more powerful its drag system would be. Consequently, the better it ability to reel in bigger fish.

Drag System

The drag system is what maintains the pressure on the spool of your reel and provides you with stability to catch fish.

20 pounds is good enough for a drag system weight when it comes to catching trout.

Ball Bearings

How smooth your reel performs in terms of both casting and reeling in relies on the number of ball bearings on it.

The higher the number, the smoother the process will be.

Moreover, if you’re going to be fishing in saltwater, you should get a reel with anti-corrosion bearings to withstand the wear and tear.

Final Thoughts

Although I think the reels I’ve mentioned all qualify to be the best spinning reels for trout on the market, some of them combine all the good features to varying degrees.

If your budget is more flexible and you want durable equipment, I’d definitely recommend the Stradic CI4+ 2500 FB by Shimano for its overall quick and reliable performance.

The Abu Garcia Revo REVO2XS10 also is a great high-end choice for its incredible speed of retrieve and smoothness.

On the other hand, a more affordable choice would be the Piscifun 4000 Spinning Reel. And even though it’s the second cheapest on the list, it also has the second-highest retrieve rate, drag, and number of bearings.

For the ideal combination between performance and affordability, I’d recommend the KastKing Sharky III 3000.